E-SHOP : LEKÁRSKE KYSLÍKOVÉ KONCENTRÁTORY
INFOLINKA
E-SHOP / POŽIČOVŇA :
0910 160 111 ( 0903 771 150)
PO-PIA, 8:00-17:00 hod
E-mail:sales@ovn.sk , ovn@ovn.sk
LIEČBA KYSLÍKOM pri ochorení COVID-19
OXYGENOTERAPIA
= lekársky koncentrátor
OVN OXYBABY 5A
Naši spokojní zákazníci,
fotky uverejnené s ich súhlasom :
LF FILTERS
FILTERS FOR COMPRESSED AIR
Filters for compressed air, spin-on type. Interchangeable filter body, airflow rate up to 9.800 Nl/min. Maximum operating pressure 16 bar.
Four levels of filtration.
Friulair has designed disposable filter cartridges with the filter grade and the flow rate clearly mounted on the casing; maintenance is easy and reliability high.
 |
INSTALLATION
1: Compressore
2: Tank
3: Pre-filter
4: By-pass
5: Dryer
6: Filter LFS
7: Filter LFX
8: Filter LFZ
9: Condensate drain
FOUR LEVELS OF FILTRATION
| Filtration grade | Air quality | Application example |
|---|---|---|
| P SERIES - 5 MICRONS | Filter capable to separate emulsion and particles down to 5 micron | Normally installed on the inlet of dryers. Ideal as pre-filter for on-line filters (series S – X – Z), and for vacuum pumps, pneumatic blowing plants. |
| S SERIES - 1 MICRONS | Filter capable to separate particles down to 1 micron, liquid an oil included. Maximum contents of residual oil 0,1 mg/m3 | Normally used on outlet of dryers as (X) grade pre-filter. Used to prevent the deterioration of the pipes of compressed air plants, for surface treatment, on vacuum pump exhaust, on compressed air motors, and as post-filter for adsorption dryers. |
| X SERIES - 0,01 MICRONS | Oil removing filter capable to separate residual oil and extremely small particles down to 0,01 micron. Maximum contents of residual oil 0,01 mg/m3. It produces air technically free from oil. | Used for the protection of control system, pneumatics haulage, painting system and as pre-filter for adsorption dryers. |
| Z SERIES - ACTIVATED CARBON | ctivated carbon filter for the elimination of oil vapours and odour. When installed, after a (X) grade filter, it lowers the maximum contents of residual oil 0,005 mg/m3. | Used in the pharmaceutical industry, for dental applications, in photographic workshops, packaging and galvanic treatments. |
