There is a much better way to dissolve Ozone in water.
Many Ozone Generators are producing Ozone at 3% concentration, hardly achieving 30% of total ozone dissolved and wasting incredibly large amounts of Oxygen.
The NANO can dissolve up to 70% of total Ozone produced, while using incredibly low amounts of Oxygen (4slpm).
Thats more then Double the Ozone dissolved, Imagine replacing two expensive inefficient clunky Ozone Generators with one Sleek, Compact NANO Ozone Generator.
- Produces ozone from oxygen
- **PCOP system on board
- Remote Control Safety Shutoff
- Easy to install and maintain
- Low operating cost
Ozone Production: 15 g/h
Max. Ozone Production: (20g/h)**
Standard Working Pressure: 20 psig
Concentration (% by weight O3): 5 -10%
Gas flow rate: 0.1 - 4 slpm
Ambient Operating Conditions:
Well-ventilated area that is protected from weather elements
Control Power Requirements
120 V ~ ±10%, 50/60 Hz, Single Phase, 5.0 A
220 V ~ ±10%, 50/60 Hz, Single Phase, 3.5 A
Maximum Power Consumption: 150-200 W
Oxygen Inlet: 0.25-inch Swagelok
Ozone Gas Piping Outlet: 0.25-inch SS Swagelok
Materials and Construction
Enclosure: Brushed Stainless Steel/Aluminum
High Precision Machined Ozone Generator Cell tested at up to 120 PSIG for
leaks. O3/O2 Gas Tubing: PTFE/304 Stainless Steel/Brass
Dimensions and Weight
Enclosure Dimensions: 5-inch height x 5-inch width x 14-inch depth
Generator Weight: 5.8kg
CSA - available as an option
Reliability, Performance and Quality Backed By 3 Years Warranty!
* Product Characteristics are indicated at 20°C and will vary with the operating temperature.
**Maximum Ozone Production is achieved at high oxygen flows and is Impractical for water treatment.
All Ozone Generators could be ordered with optional 4-20 mA (0-10V DC) remote control, see "Info & Prices" for details
UGGESTED OXYGEN CONCENTRATOR
OVN OXYBABY 5/10
For best results with Ozone generators we recommend using OVN Oxygen concentrators. Offers completely self-contained oxygen generators. Equipped with air compressors, these generators require no special installation. Simply connect the oxygen outlet to your oxygen distribution system and the power cord to a grounded electrical outlet. Turn the unit on and set your oxygen delivery pressure.