ALUMINIUM HIGH PRESSURE FILTERS
FH high pressure filters for industrial applications with pressures up to 50barg (725psig).
Strong cast aluminium or carbon steel construction (only for FH*1000 model).
All housings are powder coated to prevent corrosion.
HF series is produced in accordance with directive PED 97/23 CE.
FOUR LEVELS OF FILTRATION:
|Filter grade||Air quality||Application example|
|P SERIES - 3 MICRONS||Filter capable to separate emulsion and particles down to 3 micron||Normally installed on the inlet of dryers. Ideal as pre-filter for on-line filters (series S – X – Z)
and for vacuum pumps, pneumatic blowing plants.
|S SERIES - 1 MICRONS||Filter capable to separate particles down to 1 micron, liquid an oil included. Maximum contents of residual oil 0,1 mg/m³.||Normally used on outlet of dryers as (X) grade pre-filter. Used to prevent the deterioration of the pipes of compressed air plants, for surface treatment, on vacuum pump exhaust, on compressed air motors,
and as post-filter for adsorption dryers.
|X SERIES - 0.01 MICRONS||Oil removing filter capable to separate residual oil and extremely small particles down to 0,01 micron. Maximum contents of residual oil 0,01 mg/m³. It produces air technically free from oil.||Used for the protection of control system, pneumatics haulage, painting system and as pre-filter for adsorption dryers.|
|Z SERIES - ACTIVE CARBON
||Activated carbon filter for the elimination of oil vapours and odour. When installed, after a (X) grade filter, it lowers the maximum contents of residual oil 0,003 mg/m³.||Used in the pharmaceutical industry, for dental applications, in photographic workshops, packaging and galvanic treatments.|